Quechua 2 Man Tent - Mh100

First night camping? Our designers eco-designed this 2-person tent that is simple and easy to pitch.

PITCHING AND STRIKING THE TENT

This tent has a classic dome structure.
All you have to do is fit the tent poles with the bedroom, and then fit the flysheet on top.
To strike the tent, the process is the same, but in reverse.
If it is windy it is advisable to attach the guy ropes that are provided in the tent bag.

MATTRESS COMPATIBILITY

Recommended tent with a self-inflating mattress or trekking mattress up to 65 cm wide.
We do not recommend using inflatable mattresses, that are more than 8 cm thick, in this tent.
Indeed, this greatly reduces the volume inside the tent and increases condensation inside.

VENTILATION OF THE TENT

So that air can flow and be replaced between the bedroom and the flysheet, and eliminate the natural condensation as much as possible, the tent has 1 air vent at the top.

WATERPROOFING OF THE TENT

All our tents are validated in the laboratory and in the field to guarantee the waterproofing.
To do this, we put the entire tent under a 200 L/h shower for 3 hours.
The flysheet is made of 2000mm Schmerber PU-coated polyester and the groundsheet is made of 120g/m² polyethylene. All the seams are sealed with thermobonded tape.

WIND RESISTANCE

We test all our tents in a wind tunnel on a turntable to expose each side to the wind. A well-assembled tent with all the guy ropes properly deployed around the tent should remain habitable with a wind speed measured at 40 km/h near the ground (Force 5).

WHAT DOES MY PRODUCT CONTAIN?

- 1 bedroom
- 1 waterproof flysheet
- 2 poles
- 7 tent pegs
- 4 guy ropes
- 1 cover