V53 universal lcd led tv controller driver board VGA HD~MI USB TV og full kit 40pin 1ch 6bitds

This kit support the panel in following condition:

Signal Interface:DS (1 ch, 6-bit) , 40 pins , Connector

For example:

LTN156AT36-D01 LTN156AT17-D02 LTN156AT24-W01 LTN156AT22-001 ect.

Download:

https://drive.google.com/file/d/1Dr46NBxl4sRfxnhPFBUJy7LJquBEsF

Program update method:

1. Prepare a USB f drive and download the program we provide

select the required from the file(select according your screen resolution)andcopy Z53BK1.binto the USB f drive.

2.set the voltage on board(it is according your screen input voltage :3.3v/5v/12v)

3.plug U disc to the board, and plug 7 key board,then plug power adapter,poweron. then you can see the light on key board will be fing. it ismean the board is installing program. (at this moment , don't let poweroff!)

4.ar few minutes, the led will be stop fing, mean finished. thenpower off, Pull out the USB , then plugds cable and . poweron . On screen "no signal" , done.

Note:

voltage should be set correctly(3.3v/5v/12v);

The power requirement of 12A;

don't let power off when installing program;

The screen line not to re and dislocation;

selectds cable and should according your panel specs.if you can'tselect, pls offer panel number to us, we will help you.

Configuration & General Precautions1.Protect the board from static electricity to avoid damage to the IC.2.Keep the board away from conductor when it is working.3.Don’t pre, distort or disaemble the board.4.Clean the board with soft dry cloth when it’s dirty.5.Don’t switch on the power supply before panel is correctly connected.6.The brightne of panel is influenced greatly by temperature, you should measure it ar power on 10~30 minutes.7.Keep the board surface clean. Check the appearance of the board if there has any defective parts, such as damaged,weighty nick, etc.