Surge Protectors Fridge Guard / TV Guard Voltage Protector HLP02 UK

OPERATION：

• 1. Connecting the power, the default setting is high voltage protection voltage 270V, low voltage protection voltage
• 170V and working delay-time 10 seconds.
• 2. Press the SET key to enter the high-voltage setting page, the digital is flashing, press the + or - key to adjust the high voltage protection range.
• Press the SET key again, and it enters the next low voltage value setting, the digital is flashing again, so press the + or - key to adjust the low voltage protection range.
• Press the SET key again, and the page is entered the delay-time setting, press the + or - key to adjust the delay time after the power
• is recovery.
• Press the SET again to confirm all data are OK finally.
• 3. When the applied voltage is in the normal working range, the blue light will be ON;
• When the product is in the protection state of too high or too low voltage, the red light will be ON and the power will be cut off automatically;
• When the product is powered off because the instantaneous voltage is too high or too low, delay protection will be opened automatically, and no power output.
• 4. After the delay-time countdown off, the product to be resume working.
• Noted: The reset voltage is automatically detected at a set value below or above 10V.
• ·High-voltage protection: 10V below the original settings recovery;
• ·Low-voltage protection: 10V above the original settings recovery.