OBD2 Scanner DIESEL CAR Engine Auto Performance Chip 35% More Power, 25% More Torque

The car fault code reader is available for all 1996 and later OBD II compliant US, European and Asian vehicles. Supports CAN and all other current OBD II protocols.

Working principle   The power upgrade box is based on the OBD2 protocol and works by remapping and adjusting the on-board computer. After driving 200km, the power upgrade box will automatically adjust to adapt to the car driving computer according to the owner's driving habits, so as to enhance the engine performance. According to the owner's driving habits, this product can readjust the driving computer ECU to achieve the purpose of increasing engine power. It will automatically adjust according to the increase of the mileage of the car, in order to adapt to the change of the driver's driving habits, and achieve the optimal effect of increasing power.   

Product Introduction   Power Upgrade Box is a small power upgrade box that can be plugged and played. When the product is inserted into the OBD interface, it can automatically read the data of the ECU of the vehicle computer. Through the data of the ECU, it can adjust the supercharging pressure, fuel quantity, injection time and pressure to increase the performance of the engine. This product only discovers the hidden conservative power setting before the car leaves the factory, and only works within the limited power range of the engine. It will not cause any damage or other adverse effects on the engine and the ECU. If you want to restore the factory Settings, just unplug the device.  The main function   Red Yellow: 35% increase in power, 25% increase in torque (theoretical value, depending on vehicle condition and driver habits)   Green Blue: Economical fuel savings of 15% (theoretical value, depending on vehicle condition and driver habits)

Installation and calibration:  

• Find the car OBD interface, and then plug in the device.
• This one is more critical, turn the car key, open the ignition switch. (Don't start the car)
• Press the device reset button for about 5 seconds. After releasing the button, wait for about 30-54 seconds (the device will establish a connection with the ECU).
• Start the engine.
• The device will automatically recognize the owner's model and driving habits, and after about 200 kilometers (150 miles) of running-in, the device will automatically adjust the engine power to achieve optimal results.