Lightning Arrestor 200W DC 0MHz To 6GHz IP67 Waterproof

Feature:
1. LARGE RANGE: It covers 0mhz to 6GHz, so it can pass any frequency you want to receive, while guarding your indoor equipment. Such as AM, FM, HD, UHF, VHF, 29mhz, 118mhz, 433mhz, 470mhz, 650mhz, 700mhz, 850mhz, 915mhz, 868mhz, 1700mhz, 1900mhz, 2100mhz, 2.4g and 5.8g, etc.
2. LOW LOSS: This arrestor has low dBi loss, the loss is less than 0.1dBi, the arrestor has VSWR not more than 1.25, as long as the other components in the system is higher, the arrestor will not affect the VSWR. Additional grounding cable is needed, preferably 8 or 6 gauge copper wire.
3. EASY TO INSTALL: Coaxial lightning arrestor with a lighting stop at the end with an N shaped tab (for antennas). The other end has a connector type N female (for external cables). Grounding terminal connection for grounding cables.
4. LIGHTNING STRIKE HANDLING: Lightning arrestor is specified for the maximum amount of current they can handle in a given period of time, because the strength of the current causing damage is greater than the voltage, rated at 10kA (8/20μs).
5. WATERPROOF: This arrester is weatherproof and can be used outside or inside as long as it is properly tightened. However, the entire connection may still need to be weatherproofed. It can be sealed with 130C tape.
Specification:
Item Type: Coaxial Lightning Arrestor
Material: Metal
Size: Approx. 68.3mm / 2.69in
Characteristic Impedance: 50Ω
Frequency Range: DC 6Ghz
Voltage VSWR: ≤1.3
Transmission Power: 200W
Dielectric Withstand Voltage: ≥2500V RMS, 50HZ, At Sea Level
Working Voltage: ≤1000V RMS, 50HZ, At Sea Level
Residual Voltage: ≤30V
Additional DC Voltage: 230V
Waterproof Level: IP67.

Package List:
1 x Coaxial Lightning Arrestor
Note:
Manual measurement, please allow some errors.