Description:1. New Smart Stand: The cooling stand can lower the operating temperature of the device for Xbox Series S console. It can effectively reduce the temperature of the console, improve the performance of the console and reduce power consumption.2. Easy to Use: The fan control switch of this stand is the single-on auto-reset switch, which is controlled by a smart chip. Pre this switch lightly to e the fan work at the highest speed level. Each time you pre the switch, you can switch the speed level or turn off the fan (3 levels, including the high level, middle level and low level, and pre the switch one more time, you can turn off the fan)3. Indicator Lights: Red, orange, green and off. The indicator lights can be switched at will according to the ambient temperature. Our cooling fan can speed up the air circulation of the console system to effectively prevent the console temperature from becoming too high. Reduce the power consumption of the console and extend its service life. The smart MCU chip can also cut the memory power, so the cooling stand will work at the same wind speed level again after the power outage.4. Compatible Ports: There is a Type A USB 2.0 port and a public port on the left side of the product, which can be used for external devices.5. Note for Use: During use, please p this product on the table or at a well-ventilated p.Specifications:Applicable models: for Xbox Series SMaximum fan speed:Fast speed level: 3200±320 rpm:Medium speed level: 2800±280 rpm;Low speed level: 2300±230 rpm;2 built-in cooling fansProduct size: (length x width x height) 150x63x25mm/5.91x2.48x0.98inchProduct material: ABSant:During use, please p this product on the table or at a well-ventilated p.This product is a cooling stand.Please do not block any surface ventilation part during use.Do not insert anything (especially metal parts) into the heat diipation hole. Otherwise, it may damage the fan or the circuit in the stand and cause damage.Packing List:Cooling Stand *1Notes:Due to the lighting effects and shooting angles, there might be some color difference, please understand.Due to manual measurement, there might be a tolerance in the product size.