Benetech GT5105A Digital Earth Resistance Tester 2000

Features:

It can be used to measure grounding resistance of various facilities wiring, electrical equipment, lightning protection equipment and other grounding devices, and it can also measure ground voltage.

Controlled by intelligent microcontroller chip, with high accuracy and high reliability.

It can be used for precise three-wire measurement or simple two-wire measurement.

When measuring ground resistance, if C or E end of test lead is not in good contact, "---Ω" warning appears on LCD.

Double insulation or reinforced insulation safety structure. OL stands for over range.

Data hold function. When measuring, press the HOLD key to hold the current data and display the HOLD symbol. Press the HOLD key again to cancel the data hold function.

The measured data can be saved, reviewed, deleted.

Large LCD with backlight, it also has data hold and battery detection function.



Specifications:

Material: ABS

Ground Resistance Range: 20Ω/200Ω/2000Ω

Ground Voltage Range: 200V

Overload Protection:

Ground resistance: 200V AC (10 seconds)

Ground voltage: 400V AC (30 seconds)

Insulation Resistance: The insulation resistance between measurement circuit and case is not less than 20MΩ

Working Environment: 5~40℃, ≤80%RH (no fog): ≤2000 meters

Storage Conditions: -20~60℃, ≤70%RH (no fog)

Supply: 9V supply [1.5V (AA alkaline battery )*6] (NOT included)

Item Size: 176 * 110 * 77mm / 6.93 * 4.33 * 3.03in

Item Weight: 563g / 19.86oz

Package Weight: 2600g / 91.71oz

Package Size: 27 * 23 * 14.5cm / 10.63 * 9.06 * 5.71in



Package List:

1 * Resistance Tester

1 * 5 Meters of Green Test Lead (with alligator clip)

1 * 10 Meters of Yellow test lead (with alligator clip)

1 * 20 Meters of Red Test Lead (with alligator clip)

2 * Auxiliary Ground Nail

1 * Strap

1 * Cloth Bag

1 * Manual (English)