12V 24V 110V 220V Temperature Controller Incubator Microcomputer Thermostat For

12V 24V 110V 220V Temperature Controller Incubator Microcomputer Thermostat for Accuracy 0.1 Degree Dry Contact 10A/20A Relay

Feature

Mini temperature controller.

With clear LED display for better readability.

Wide temperature measuring range.

Heating or cooling control.

All parameters setting can be saved after short circuit.

Relay output.

High Control precision 0.1 cende

Can be used for domestic freezer, water tanks, refrigerator, industrial chiller, steamer, industrial equipment and other temperature-controlled system.

Specification

Power Supply: DC12V / DC&AC24V /  AC110V-220V optional

Temperature Control Range:-55°C - 120°C

Resolution Ratio: 0.1°C(-9.9-99.9); 1°C(other range)

Color of Displaying: red/blue

Measurement accuracy: ±0.1°C

Control accuracy: 0.1°C

r: NTC10K

Output: Relay Contact Capacity 10A 220V / 20A 12V / 20A 24V

Envmental requirements: -10-60°C , humidity 20%-85%RH

r wire: 1 meter/2 meter /3 meter optional

Dimension:80mm *42mm*27mm

Wall Cutting Size:73mm*39mm

-100% new high quality.

-2 mode:Cooling or heating

-Retuun Difference,Control the ambient temperature to work within a certain temperature range

-Set maximum/minimum upper limit temperature to avoid accidents.

-Automatically start cooling or heating constant temperature.

-Temperature calibration. Temperature can be calibrated as required.

-High temperature alarm, when the temperature reaches the set temperature, the controller will alarm.

-Delay start time,When the refrigerator or heater is working with a delay, the delay function can be turned on to protect the life of the device.

-Memory recovery，Power off and restore, save all set parameters;

-Reset,Due to some human reasons, the internal setting of the thermostat is confusing. you can use this function to restore the factory settings.

The thermostat output is 10A/20A relay, to meet a variety of high power load, connected to the control circuit, you can supply power for the thermostat, at this time the display screen for the envment temperature.

How to use code:

-Long pre SET key, when the code and parameter value are displayed, leave the SET on; pre the SET key to switch the code, pre "+","-" to adjust the parameter value;

Code table:

Code

Function

Set Range

Default

P0

Heating/Cooling

H/C

C

P1

Return Difference

0.0-30

2

P2

Setting limits to the manimum

120

120

P3

Setting limits to the minimum

-55

-55

P4

Temp. Correction

-20

0

P5

Delay Start

0-10min

0

P6

Alarm Temp

-175

OFF

P7

Data locked

ON/OFF

OFF

P8

Restore factory setting

ON/OFF

OFF

Package include:

1 X Mini Digital Temperature Controller

1 X Mobile r

1 X Product Manual

About shipping
Shipping and Packaging All itwill be double checked and well packed before sending.Itwill be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very important to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.