ALLTOP SOLAR CHARGE CONTROLLER 10A

:Type: Solar Energy MeterMaterial: ABS+componentsPower supply: 12V/24V Display type: LCD Display interface: Dual USBPackaging content: 1x solar panel battery charging controllerFunction: Safety instructions:Before the first installation, ensure that the battery voltage is sufficient for the controller to recognize the battery type.2. The battery cable should be as short as possible to minimize losses.3. The regulator is only applicable to lead-acid batteries: open type, A-GM, gel, not applicable to nickel metal hydride batteries, lithium ion batteries or batteries.4. The charging regulator is only suitable for regulating solar modules. Do not connect other charging sources to the charging controller.characteristic:1. Integrated industrial microcontroller.2. One click configuration, digital display, and automatic memory function.3. Fully PWM load management load.4. Built in short circuit protection, open circuit protection, reverse protection, and overload protection5. Dual MOSFET reverse current protection, low thermal output.
System connection:1. Connect the battery more or less to the charging controller. Display 1 when a 12V battery is detected, and 2 when a 24V battery is detected.2. Connect the photovoltaic module to the regulator to a greater or lesser extent.3. Connect to the consumer to charge the controller more or less. The reverse order applies when uninstalling! Incorrect sequence may damage the controller!Note: 1. Due to differences in display and lighting effects, the actual color of the item may differ slightly from the color shown in the picture. thank you! 2. Due to manual measurement, please allow a measurement deviation of 1-3cm.