AISIN 5W40 Fully Synthetic High Performance Engine Oil 10,000KMs

5W40 Fully Synthetic High Performance Engine Oil 10,000KM

Many motorists are torn between servicing their engine using conventional oil or fully synthetic engine oil. Well, even with the slightly increased price of synthetic motor oil, the advantages outweigh the increased cost. Talk of friction reduction, fuel efficiency, engine performance, engine durability, oil change interval...the list is endless. With the improved friction reduction, engine parts that wear out over time will last longer. This will reduce the maintenance cost over the long term use of the vehicle. Also with the less oxidation and reduced sludge buildup, oil filters will have a longer life and longer time between replacements. Because synthetic oil is better on your engine and has fewer impurities, it can go longer than conventional oils or synthetic blends. Synthetic oil change intervals range from 10,000-15,000 KMs ( we recommend you change at between 8,000-10,000KMs). By comparing the advantages and disadvantages of using synthetic motor oil product in your vehicle, you will see a switch from the petroleum based motor oils will save you money in the long run.

Aisin Fully Synthetic Oil is formulated from Synthetic Technology base oil, high performance additive systems and leading edge viscosity index improver, meeting the requirement of current advanced top-tier engine oil grade of API SN and ILSAC GF-5. It is optimized to provide complete engine oil performance especially for fuel efficiency, reduced friction and durability of your engine.

Specifications:

Formulated from Poly-Alpha-Olefin (PAO), 100% Synthetic Group IV Base Oil, mainly used for aircraft engine oil and Ester, 100% Synthetic Group Base Oil, used to balance the effects of seals, solubilize additives & improve energy efficiency through higher lubricity. Performance Standards: API SN / ILSAC GF-5 Meet and exceeds the requirement of: ACEA A3/B3-04, A3/B4-04, ACEA C3-04, BMW Longlife-01, BMW Longlife-04, Mercedes-Benz 229.51, Porsche, Volkswagen, 502.00/505.00

• Maximize Engine Life.
• Longer Equipment Lifespan.
• Maximize Power & Performance.
• Reduces wear and tear.
• Super protection against friction.

Advantages of Aisin Fully Synthetic Premium Engine Oil:

• Fuel economy: The wide temperature range capability of the synthetic technology base fluid ensures correct oil viscosity to reduce friction at start-up, and to provide maximum lubricity during high temperature operation. This is important for high perfomance turbo charged and supercharged engines.
• Engine power and maintainability: Reduced piston blow-by gas with the oil’s cleanliness effect could maintain engine power and maintaining engine cleanliness with its prevention of engine sludge forming will extend engine service life. 
• Oil drainage interval: Excellent oxidation resistance and low volatility will extend oil drainage interval. 
• All-temperature wear resistance advanced non-conventional base oil formulation, high performance additive systems and leading edge viscosity index improver deliver excellent shear stability and maximum wear protection in high speed, high temperature driving conditions and rapid, highly effective oil film protection and component wear resistance during very low temperature cold starts. 
• Synthetic oil does not react to temperature changes as petroleum based motor oil. Synthetic motor oil will not thicken during cold temperatures which improves engine starting and oil pressure buildup.
• Natural petroleum based oil motor oils will break down at high temperatures. At this high temperature, oxidation can occur which will develop deposits and varnish. These also can cause sludge. Synthetic oil does not have these problems.

Ideal for:

• All gasoline fueled vehicles 
• High performance cars equipped with DOHC (All gasoline Subaru turbo charged and NA engines), EFI and VVT. 
• Four-stroke gasoline engines in motorcycles. 
• Sports vehicles