>> Automatic detection of battery voltage 12V/24V/36V/48V;
>> Multi-function LCD display;
>> Protection against polarity reversal of solar panels;
>> Start cooler at 35°C
>> Overload protection;
>> Suitable for battery types, sealed, lead-acid, vented, lithium batteries;
Notice:
The output terminal is only suitable for 12V lamps, and the maximum power is 60W.
If you exceed this power, it will be burned, and the output to the battery has no protection against polarity reversal, so pay attention when connecting.
parameter:
>> Charging mode: MPPT maximum power point automatic tracking 100% MPPT.
>> The charging method has three stages: constant current (MPPT), constant voltage (voltage absorption), and floating voltage.
>> DC system type 12 V/24 V/36 V/48 V automatic recognition.
>>Size 21.5 x 11.5 x 5cm
>>Double wiring port: 6mm
>>Weight 1.2kg
Automatic identification of system voltage:
>> 12V system (DC 9V-DC15V)
>> 24V system (DC 18V-DC29V)
>> 36V system (DC 30V-DC39V)
>> 48V system (DC 40V ~ DC 60V)
Maximum voltage from solar panel to controller:
>> 12V DC system 20V ~ DC80V.
>> 24V DC system 37V ~ DC105V.
>> 36V DC system 50V ~ DC160V.
>> 48V DC system 72V~DC160V.
Output Specifications:
>> Battery charging voltage in sink: Refer to battery charging reference. (adjustable).
>> Float charge voltage: Refer to the charging reference value of the battery. adjustable
Specifications
Key Features
100% MPPT controller
Intelligent peak point tracking technology
High performance built-in dsp controller
Automatic battery voltage detection 12V/24V/36V/48V
The screws for wall fixing are too tiny for the fixture holes. The slots for wires are too small for the recommended wire sizes. This item by Jumia is definitely a pirated fake. I have an original version from PoWMR and its definitely much better
12-08-2024by Joseph
Verified Purchase
PowMr 60A MPPT Solar Charge Controller 12V~48V 190Voc LCD