915 Generation SATA/PATA/IDE Drive to USB 2.0 Adapter for 2.5/3.5 Inch Hard

The USB interface connected to the 2.5 and 3.5 inch IDE and SATA interface; USB2.0 TO IDE/SATA high-speed connection. USB2.0 high speed transmission, stable performance, Support cd-rom, DVD, cd-rom, CD - RW, DVD RW.
Support system: Windows 2000, me, XP, Vista and OS; Under Windows 2000 / ME/XP/Vista, 't need ; the solidification structure, stable performance
USB IDE/SATA conversion line
conversion head integration (2.5 inch, 3.5 inch, type ( 320 g), cd-rom (The recorder)
support hot plug, plug and play. can be used in , cd-rom, , MO, ZIP thereof. good compatibility, can realize data exchange the hardware . rate quickly, the rate of up to 480 MB/s. Using Information:
1. Place the ( box) of the jumper wire to the disc (MASTER) mode using.
(there is no power cord and other accessories)
2.the connection order
(1)first connect the power cord line to 220 v mains.
(2)connect the power adapter to the power cord end (so as not to phenomenon caused by the electric current is too , a few may be burned power adapter).
(3) connect the USB cable to your PC, and power on the box , can exchange data after the computer identify USB device a few minutes later.
3. box removal
Remove the box as the way of USB device removal, and then pull out the box.
Notice : The power adapter belongs to High heating equipment, pay attention to keep good heat dissipation. remove the ac adapter, If you do not use it. Do not connect it with the wiring board, so as not to accelerate the ageing of the electronic components and lower the service life of the product. arriving, the weather is hot, 't use box or line time for a long time, it is easy to burn in such hot weather.
colour: as shown
Material: plastic Package Contents:
1 x USB 2.0 to IDE SATA Adaptor Cable
1 x 4 Pin power cable
1 x SATA cable Only the above package content, other are not included.
Note: Light and different displays may cause the color of the item in the a little different from the real . The measurement allowed error is +/- 1-3cm.